Iris Split Keyboard
Contents
Customised Tented Iris Cases
Throughout early 2018, I worked on customising the iris case to have tenting, adjustability for multiple angles, look nicer and not break the bank like ergodox legs do.
And this is the result of my work. The case tents side-to-side and the angle can be adjusted by swapping out the standoff for various lengths from 15mm to 60mm, giving 10-27 degrees of angle.
Ordering
The case is not for sale currently. I had an issue ordering in standoffs and will need to sort that out for the future, or design a new tenting system.
There will be a new version of the iris PCB coming in 2019 so I will likely have my case design sold when that is live.
Unlike the current iris PCB, the future one will be assembled so that you only need to solder in your switches. The promicro is replaced with an onboard MCU (controller unit) as well as all diodes.
Videos
- Juju Cables: https://youtu.be/FBD-LC1K2ds
- TaeKeyboards: https://youtu.be/0P6oIOB-whM
- The Board Podcast: https://youtu.be/S-uBJfyIlWY
Photos
- Tented Iris Case options: https://imgur.com/a/dEqaHzs
- Tented Iris Case customer's photos: https://imgur.com/a/acR1qyF
- Acrylic stuff I have made: https://imgur.com/a/aWvVWB6
- Update #1 album: https://imgur.com/a/cawZjnU
- Smoke update album: https://imgur.com/a/25koSc7
- Update #2 album: https://imgur.com/a/bUhbsa2
Info
- Iris product page: https://keeb.io/products/iris-keyboard-split-ergonomic-keyboard
- Iris build guide: https://docs.keeb.io/iris-build-guide/
- July 2018 Sale update posts are now on it's own page - Iris July2018 Updates
Important note for buyers of my iris cases!
It has come to my attention that the right side of the case can be too tight due to the promicro port.
This can be solved by removing the plastic spacer so that the promicro sits closer to the PCB.
You can follow a guide here on accomplishing this: https://imgur.com/a/M9r3EW9
Without the plastic spacer, the promicro might be too close to the switch pins. Trim down the switch pins as much as possible and apply insulating tape if it looks like it will touch and create a short.
Survey
I'll have an optional survey for buyers of my iris cases soon, to collect feedback and ask a few questions. This will be emailed out towards the end of October.
FAQ
Why are the instructions in it's own bag?
This is to keep it as flat as possible and protect the sheet + stickers. If it was packaged with the iris case, the instructions and/or stickers would be creased and bent as the whole thing is wrapped.
I could fold it twice (instead of once) but I want to minimise the number of fold lines on the instruction sheet so it looks nicer (and it could still get creased on the corners, iris is not a rectangle).
Why is there so much packaging? (the zip lock/self seal bags)
Some parts need to be kept separate such as the aluminium standoffs and thumbscrew feet. If not, the anodisation can get scratched off.
The screws and M2 standoffs are separate because it was easier to pack, this will be consolidated in the future.
I've also left branding/markings/labels off most of the bags so that they can be reused. They are thicker and should last longer ( ͡° ͜ʖ ͡°).
Why is there no tracking or insurance? (international deliveries)
It would be extremely expensive. Tracked, insured and with signature on delivery would cost at least $48 AUD to the US (where I have charged $20).
I will cover any losses or damage personally. For the future and larger sales/GBs, I will investigate getting better rates from DHL, TNT etc.
How come hi-pro layers are not an option?
It honestly did not occur to me and I had already started the sale when someone first brought it up. It will be an option in the future.
Will it be sold again? When?
Yes, but not until early 2019. I have many projects in the works and want to at least wait for the next version of Iris PCBs to come out.
These PCBs are still in development but it will be fully assembled. This raises the cost but reduces the build time significantly.