Difference between revisions of "Iris Split Keyboard"
Line 77: | Line 77: | ||
=== Why is there so much packaging? (the zip lock/self seal bags) === | === Why is there so much packaging? (the zip lock/self seal bags) === | ||
− | Some parts need to be kept separate | + | Some parts need to be kept separate such as the aluminium standoffs and thumbscrew feet. If not, the anodisation can get scratched off. |
− | + | The screws and M2 standoffs are separate because it was easier to pack, this will be consolidated in the future. | |
− | I've | + | I've also left branding/markings/labels off most of the bags so that they can be reused. They are thicker and should last longer ( ͡° ͜ʖ ͡°). |
Revision as of 02:58, 13 October 2018
Contents
Laser_Ninja is making Tented Iris Cases
This is a split keyboard PCB sold on keeb.io. I have modified the original case design to allow tenting - angling the board for improved comfort and ergonomics.
The two most common methods are using an off the shelf bolt or an expensive ergodox kit, both of which are supported by the keebio cases.
My design however is minimalist and clean, using anodised aluminium parts which look great and are not that expensive.
They also allow for variable tenting angle interchangeable standoffs - the taller it is, the sharper the angle it will be.
And lastly, I offer several acrylic options that you can mix and match between the 3 levels of the case.
Ordering
The sale was closed in July with a few extras.
I will be opening it for sale with the next version of the Iris PCBs in early 2019.
These will be fully assembled so you just need to solder in switches. Other changes TBA.
Videos
- Juju Cables: https://youtu.be/FBD-LC1K2ds
- TaeKeyboards: https://youtu.be/0P6oIOB-whM
- The Board Podcast: https://youtu.be/S-uBJfyIlWY
Photos
- Tented Iris Case options: https://imgur.com/a/dEqaHzs
- Tented Iris Case customer's photos: https://imgur.com/a/acR1qyF
- Acrylic stuff I have made: https://imgur.com/a/aWvVWB6
- Update #1 album: https://imgur.com/a/cawZjnU
- Smoke update album: https://imgur.com/a/25koSc7
- Update #2 album: https://imgur.com/a/bUhbsa2
Info
- Iris product page: https://keeb.io/products/iris-keyboard-split-ergonomic-keyboard
- Iris build guide: https://docs.keeb.io/iris-build-guide/
- July 2018 Sale update posts are now on it's own page - Iris July2018 Updates
Important note for buyers of my iris cases!
It has come to my attention that the right side of the case can be too tight due to the promicro port.
This can be solved by removing the plastic spacer so that the promicro sits closer to the PCB.
You can follow a guide here on accomplishing this: https://imgur.com/a/M9r3EW9
The right side of the Iris will have the connector facing the other way (away from the PCB and closest to the table).
You may need to apply some electrical tape (or similar) if the promicro is too close to the switches - please trim the switch pins down as much as possible.
Survey
I'll have an optional survey for buyers of my iris cases soon, to collect feedback and ask a few questions. This will be emailed out towards the end of October.
FAQ
Why are the instructions in it's own bag?
This is to keep it as flat as possible and protect the sheet + stickers. If it was packaged with the iris case, the instructions and/or stickers would be creased and bent as the whole thing is wrapped.
I could fold it twice (instead of once) but I want to minimise the number of fold lines on the instruction sheet so it looks nicer (and it could still get creased on the corners, iris is not a rectangle).
Why is there so much packaging? (the zip lock/self seal bags)
Some parts need to be kept separate such as the aluminium standoffs and thumbscrew feet. If not, the anodisation can get scratched off.
The screws and M2 standoffs are separate because it was easier to pack, this will be consolidated in the future.
I've also left branding/markings/labels off most of the bags so that they can be reused. They are thicker and should last longer ( ͡° ͜ʖ ͡°).
Why is there no tracking or insurance? (international deliveries)
It would be extremely expensive. Tracked, insured and with signature on delivery would cost at least $48 AUD to the US (where I have charged $20).
I will cover any losses or damage personally. For the future and larger sales/GBs, I will investigate getting better rates from DHL, TNT etc.
How come hi-pro layers are not an option?
It honestly did not occur to me and I had already started the sale when someone first brought it up. It will be an option in the future.
Will it be sold again? When?
Yes, but not until early 2019. I have many projects in the works and want to at least wait for the next version of Iris PCBs to come out.
These PCBs are still in development but it will be fully assembled. This raises the cost but reduces the build time significantly.